Home

Who Are We?

Puffin Policies

Projects

Other Topics

How to Buy


PRODUCTS:

Aircraft Kits

Boat Kits

Electric Motors and Controllers

Engines

Props & Spinners

EDF

Batteries & Chargers

Radio & Servos

Accessories

Building Board
Puffin Models - electric and petrol engined flying models Puffin Models, Unit D3 Backfield Farm, Wotton Road, Iron Acton, Bristol, BS37 9XD
Telephone Sales:   01454 228184
Email: info@puffinmodels.com
Visitors welcome, please phone for directions.		 Secure and safe online payment system for your protection
..Specialist in Quality European Produced Motors, Controllers and Kits
Store > Electric Motors and Controllers > Mega Inrunner Brushless Motors
 
 

Mega Inrunner Brushless Motors

Mega motors are produced using the highest grade magnets and wire by a small team of engineers in Brno, Czech Republic. The Mega inrunner motors have their magnets retained using a special thin kevlar wrap around the rotor to allow motor speeds of up to 50 000 revs (35 000 revs in normal service). Mega inrunners are multi pole motors for high torque and intended for direct drive use, but they can be used with gearboxes on higher voltages. You will see copies of Mega motors, but it is the high efficiency of genuine Mega motors that lead to the Mega moto: Fly Higher, Fly longer, Fly Faster - Fly Mega!

 
16/7/10  

16/7/10
 
The Mega 16/7/10 is a 28mm diameter short 400 size motor with a 3,2mm shaft which can be used with the Mega Micro Gear, or direct drive in small models of up to 500g.
Puffin Models price: £64.95
 
 
 
 
 
16/7/12  

16/7/12
 
The Mega 16/7/12 is a 28mm diameter short 400 size motor with a 3,2mm shaft which can be used with the Mega Micro Gear, or direct drive in small models of up to 600g.
Puffin Models price: £64.95
 
 
 
 
 
16/15/2  

16/15/2
 
The Mega 16/15/2 is a 28mm diameter 400 size motor with a 3,2mm shaft which can be used geared, or in 400 size pylon racers on 2S Lipo, but is most commonly used in the Wemotec Mini Fan 480 with 3 series Li- poly batties at around 50A.
Puffin Models price: £65.95
 
 
 
 
 
16/15/3  

16/15/3
 
The Mega 16/15/3 is a 28mm diameter 400 size motor with a 3,2mm shaft which can be used geared, or direct drive in 400 size pylon racers with 3S Shark POWER 1800, or in the Mini Fan 480 with 4S LiPo.
Puffin Models price: £65.95
 
 
 
 
 
16/15/3F Integral Fan  

16/15/3F Integral Fan
 
The Mega 16/15/3F is a 400 size conventional brushless motor with 3,2mm shaft. Fitted with an integral fan to increase motor efficiency at higher current levels. Use in place of the Mega 16/15/3 where there is room for the side cable exit.
Puffin Models price: £64.95
 
 
 
 
 
16 EDF  

16 EDF
 
The Mega 16 EDF is a 28mm diameter motor with a 3,2mm shaft developed especially for use in the Wemotec Mini Fan 480 with 3S LiPo or 10 cells, whilst making best use of a Jeti Advance 40 controller for up to 1kg of static thrust (when used with 11.1v SharkPOWER 3700).
Puffin Models price: £75.95
 
 
 
 
 
16/30/1  

16/30/1
 
The Mega 16/30/1 is a 28mm diameter conventional brushless motor with 3,17mm shaft for ECO Expert racing using 29 and 30mm propellers, and the Wemotec Mini Fan 480 with 3S LiPo at around 55A.
Puffin Models price: £94.95
 
 
 
 
 
16/30/2  

16/30/2
 
The Mega 16/30/2 is a 28mm diameter conventional brushless motor with 3,17mm shaft. Perfect where low current draw is required when operating in 70mm fans with 6S batteries (should remain under 35A).
Puffin Models price: £89.95
 
 
 
 
 
16/20/2  

16/20/2
 
The Mega 16/20/2 is a 28mm diameter conventional brushless motor with 3,2mm shaft for geared use in thermal soarers, direct drive in pylon racers, 1/10 scale cars, and the Wemotec Mini Fan 480.
Puffin Models price: £74.95
 
 
 
 
 
16 EDF 5S  

16 EDF 5S
 
Mega 16 EDF 5S motor designed for use in 70mm fans with 5S Lithium battery packs.
Puffin Models price: £77.95
 
 
 
 
 
16/40/1  

16/40/1
 
The Mega 16/40/1 is a 28mm diameter conventional brushless motor with 3,17mm shaft for the Wemotec Mini Fan 480 with 4S and 5S LiPo.
Puffin Models price: £105.95
 

This product is out of stock

 
 
 
 
16/15/4  

16/15/4
 
The Mega 16/15/4 is a 28mm diameter 400 size motor with a 3,2mm shaft which can be used geared, or direct drive. The Mega 16/15/4 was just made for all 400 size jet models.
Puffin Models price: £65.95
 
 
 
 
 
16/15/4 Combat  

16/15/4 Combat
 
The Mega 16/15/4 Combat is a 28mm diameter 400 size motor with a 5mm shaft which can be used geared, or direct drive. The Mega 16/15/4 Combat was just made for all 400 size jet models.
Puffin Models price: £67.95
 
 
 
 
 
16/15/5  

16/15/5
 
The Mega 16/15/5 is a 28mm diameter 400 size motor with a 3,2mm shaft which can be used geared, or direct drive.
Puffin Models price: £65.95
 
 
 
 
 
16/15/6  

16/15/6
 
The Mega 16/15/6 is a 28mm diameter 400 size motor with a 3,2mm shaft which can be used geared, or direct drive.
Puffin Models price: £65.95
 
 
 
 
 
16/15/7  

16/15/7
 
The Mega 16/15/7 is a 28mm diameter 400 size motor with a 3,2mm shaft which can be used geared, or direct drive.
Puffin Models price: £65.95
 
 
 
 
 
16/25/2  

16/25/2
 
The Mega 16/25/2 is a conventional 6 pole brushless motor designed for direct drive use in pylon racing models. This is a very fast sports motor on 3S LiPo.
Puffin Models price: £82.95
 
 
 
 
 
16/25/1  

16/25/1
 
The Mega 16/25/1 is a conventional 6 pole brushless motor normally used in Hydro 1 boats on 2S LiPoly. This motor has also been used as a very fast motor in ECO Expert boats.
Puffin Models price: £82.95
 
 
 
 
 
16/25/2 F5D  

16/25/2 F5D
 
The Mega 16/25/2 F5D is a conventional 6 pole brushless motor designed for direct drive use in pylon racing models. This is the world beating F5D motor when used with 5S LiPo, and also a very fast sports motor on 3S LiPo.
Puffin Models price: £85.95
 

This product is out of stock

 
 
 
 
16/25/3  

16/25/3
 
480 size conventional brushless motor with 3,2mm shaft
Puffin Models price: £71.95
 
 
 
 
 
16/25/4  

16/25/4
 
480 size conventional brushless motor with 3,2mm shaft
Puffin Models price: £71.95
 
 
 
 
 
16/25/5  

16/25/5
 
480 size conventional brushless motor with 3,2mm shaft
Puffin Models price: £71.95
 
 
 
 
 
16/25/6  

16/25/6
 
480 size conventional brushless motor with 3,2mm shaft
Puffin Models price: £71.95
 
 
 
 
 
22/20/2  

22/20/2
 
The Mega 22/20/2 is a 36mm diameter 500 size motor with a 5mm shaft which can be used geared in aeroplanes, in 90mm fans on 3S LiPo (10cells), or in 7 cell boats with propellers around 30mm diameter.
Puffin Models price: £75.95
 
 
 
 
 
22/20/1E  

22/20/1E
 
The Mega 22/20/1E is a 36mm diameter 500 size motor normally used in Hydro 1 boats on 2S LiPoly, or can be used geared in aeroplanes at high current levels.
Puffin Models price: £75.95
 
 
 
 
 
22/20/3  

22/20/3
 
The Mega 22/20/3 is a 36mm diameter 500 size motor with a 5mm shaft which can be used direct drive or geared in aeroplanes, and is commonly used in the 90mm Wemotec Midi Fan on 4S LiPo (14 cells) up to about 50A.
Puffin Models price: £75.95
 
 
 
 
 
22/20/3E  

22/20/3E
 
The Mega 22/20/3E is a 36mm diameter 500 size motor with a 5mm shaft which is commonly used direct drive in aerobatic aeroplanes with 8 cells or 3 Series A123 cells with 9x6 propellers up to about 36A.
Puffin Models price: £72.95
 
 
 
 
 
22/20/4  

22/20/4
 
The Mega 22/20/4 is a 36mm diameter 500 size motor with a 5mm shaft which can be used direct drive with 10x6 propellers in electric powered thermal soarers on 8 NiMh cells or 3 Series A123 cells. Perfect for smaller aerobatic aeroplanes at up to 1.5kg with 11,1V RAY 3300 LiPo with 9x6 propellers at 35A.
Puffin Models price: £75.95
 
 
 
 
 
22/30/2  

22/30/2
 
The Mega 22/30/2 is perfect for use in the 90mm Wemotec Midi Fan on 5 Series LiPo, or the 90mm Vasa Fan on 6 Series LiPo.
Puffin Models price: £85.95
 
 
 
 
 
22/30/2E  

22/30/2E
 
The Mega 22/30/2E is a slighly softer version of the Mega 22/30/2 intended for use in 90mm fans on 6 to 8 Series LiPo.
Puffin Models price: £85.95
 
 
 
 
 
22/30/3  

22/30/3
 
The Mega 22/30/3 is a 36mm diameter 600 size motor with a 5mm shaft which is suitable for use in thermal soarers on 7 or 8 cells (3 Series A123 cells) with 12x6 propellers, and fast aerobatic 10 cell (3 Series LiPo) models with 10x6 propellers.
Puffin Models price: £85.95
 
 
 
 
 
22/30/3E  

22/30/3E
 
The Mega 22/30/3E is a 36mm, 600 size motor with a 5mm shaft intended for use in fast aerobatic models on 3S LiPo, or aerobatic models and thermal soarers on 8 cells (3 Series A123 cells).
Puffin Models price: £89.95
 
 
 
 
 
22/3S/1150  

22/3S/1150
 
The Mega 22/3S/1150 is a new electric motor designed for direct drive use in gliders and sports aerobatic models with 10 cells, 3 Series LiPo, and 4S A123 cells. The mounting is 4 x M3 holes set at 45 degrees with 25mm centres.
Puffin Models price: £75.95
 
 
 
 
 
22/30/4  

22/30/4
 
The Mega 22/30/4 is a 36mm diameter 600 size motor with a 5mm shaft which is suitable for use in thermal soarers on 10 cells (3 Series LiPo) with 12x6 and 12x8 propellers, and aerobatic models with 4 Series LiPo on 10x7 to 11x5.5 propellers.
Puffin Models price: £85.95
 
 
 
 
 
22/30/4E  

22/30/4E
 
The Mega 22/30/4E is a 36mm diameter 600 size motor with a 5mm shaft intended for use with 4S SharkPOWER 3700 battery packs as a direct replacement for .40 4 stroke engines in vintage models flying at up to 3.5kg.
Puffin Models price: £85.95
 
 
 
 
 
22/45/3  

22/45/3
 
The Mega 22/45/3 is a 36mm diameter motor with a 5mm shaft which is suitable for a variety of applications on 10 to 14 cells (3 to 4 Series LiPo or 4 Series A123).
Puffin Models price: £115.95
 
 
 
 
 
22/45/3E  

22/45/3E
 
The Mega 22/45/3E is a slightly softer (lower current) version of the Mega 22/45/3 mainly for use on 12 to 16 cells (4 to 5 Series LiPo).
Puffin Models price: £115.95
 

This product is out of stock

 
 
 
 
22/45/1E  

22/45/1E
 
The Mega 22/45/1E is mainly used in Mono 3 fast electric boats and EDF.
Puffin Models price: £115.95
 
 
 
 
 
22/45/2  

22/45/2
 
The Mega 22/45/2 is mainly used in Mono 3 fast electric boats.
Puffin Models price: £115.95
 
 
 
 
 
EDF 120 5mm Shaft  

EDF 120 5mm Shaft
 
The Mega EDF 120 is designed for use with fans of 100 to 120mm diameter, and provides up to 5.5kg of thrust with the 120mm Turbofan 4000 and 10S LiPo batteries.
Puffin Models price: £145.95
 

This product is out of stock

 
 
 
 
EDF 120 8mm Shaft  

EDF 120 8mm Shaft
 
The Mega EDF 120 is designed for use with fans of 100 to 120mm diameter, and provides up to 5.5kg of thrust with the 120mm Turbofan 4000 and 10S LiPo batteries. This motor is also suitable for use with Schubeller 120mm fans with an 8mm rotor adapter. This is a special 8mm shaft version of this motor.
Puffin Models price: £165.95
 
 
 
 
 

Total Items in basket:  0

Total Price £0.00

Check basket?
Go to checkout
 

Use our search bar below!
 
Search results will display below:
 
 

 
© Copyright 2002 - 2012 Puffin Models Ltd