Engines from MVVS dedicated to the very highest quality and service, and DLA creating a storm in model flying right now.
For MVVS, you can call us for advice, or an e-mail to email@example.com will receive a reply from the appropriate product support manager.
MVVS 26 to 30 cc Petrol Engine Standard Silencer, lightweight aluminium and effective! Also fits the glow MVVS 26cc and 30cc
ICU-S ignition for use only with later MVVS engines that have magnets spaced at 120 degrees and NGK M10 spark plugs. The plug cap must snap over the hexagon on the spark plug before the ignition unit is switched on.
Tuned silencer intended to fit the MVVS 2cc and 2,5cc engines that provides 30% higher performance than a standard exhaust.
1/8 inch bore silicone recoil fuel tubing to help keep fuel lines out of propellers! 300mm long as shown.
MVVS 3213 carburettor to fit(.12 to .15 cu in)MVVS glow engines
500ml petrol tank with fittings including a special clunk with felt filter fitted.
Flourescent pink silicone fuel tubing helps to identify different fuel lines - or just to be different! 2mm bore, 5mm outside diameter. Cut from the roll, price for 1m
MVVS 3216 carburettor to fit 3.5-8.0 cc (.21 to .49 cu in)MVVS glow engines
MVVS Header/Manifold to fit the MVVS 35 and MVVS 40cc petrol engine. Set of gaskets included. Use with the 3268 Tuned Silencer. The mild steel header can be easily re-worked if necessary.
1 litre petrol tank with fittings including a special clunk with felt filter fitted
Flourescent green silicone fuel tubing helps to identify different fuel lines - or just to be different! 2mm bore
MVVS 4.6ccm Cylinder Piston 3047/0650 (incl. Connecting Rod 0951)